Also Suitable for:

• Pharmaceutical
• Oil & Gas
• Fragrance & Flavor
• Sugar Indusrty
• Food and Beverage Industry
• Cosmetics
• Energy & Environment
• Material Processing

Features:

• Interior and Exterior both made of Stainless Steel
• 34 Different Models
• 9 model sizes (30 ,55, , 75 , 110 , 160 ,260,450,750,1060 litres volume)
• 2 model variant: SingleDISPLAY and  TwinDISPLAY
• Temperature range up to +300ºC
• All Round heating on all 4 sides for excellent temperature homogeneity
• Natural Convection (N) or Forced Air Circulation(F)
• Prewarming fresh air
• AtmoCONTROl Software
• Calibration certificate at +160ºC provided as standard
• Various accessories available as option on request

Options:

• Extended over temperature protection by additionally integrated Pt100 sensor for independent temperature monitoring for models with Single display
• Temperature restriction - Temperatures: +60, +70, +80, +95, +100, +120, +160, +180, +200 or +250 °C (Please, indicate upon ordering) A8
• Full-sight glass door (4-layer insulating glass), temperature range up to max. +250 °C or Temperature-range up to max. 300 °C.
• Chamber modification for the application of reinforced perforated stainless steel shelves or stainless steel grids (bearing rails mounted in the working chamber) - includes replacement of standard grids by reinforced grids (standard with 1060)
• Interior socket (can only be ordered with limited temperature range - max. +60 °C), ampacity 230V/2, 2A/500W, can be switched off with the On/Off switch, cannot be switched individually, moisture tight IP68 (requires option A8 against surcharge)
• Interior nearly gastight - technical clarification required for combination with other options
• Interior nearly gastight with possibility for inlet/outlet through 2 tubes with ball valves - technical clarification required for combination with other options
• Entry port, 23 mm clear diameter, 14 mm clear diameter , 38 mm clear diameter, 57 mm clear diameter, 100 mm clear diameter
• 4 – 20 mA current loop interface (0 to +310°C corresponds to 4 – 20 mA), temperature controller actual value
• Fan speed monitoring with switching off the heating and with alarm in case of failure – optional for UFplus only
• Door with lock and key (safety lock)
• Potential-free contact for combination error message (e.g. supply failure, sensor fault, fuse)
• Potential-free contact (24 V/2 A) with socket to NAMUR NE 28, for signal generation, controlled by programme segment, for free-selectable functions to be activated (e.g. activation of audible and visual signals, exhaust motors, fans, stirrers, etc. Only for units with Twin DISPLAY; max 2 contacts on 1-phase appliances; max 4 contacts on 3-phase appliances, 2 contacts
• Process-dependent programmable door lock (only for units with Twin DISPLAY)
• Door-open-recognition (only for units with Twin DISPLAY)
• Flexible Pt100 temperature sensor, positioned fl exibly in chamber or load, for local temperature measurement (up to 1 additional sensor is possible). The measured temperature will be indicated on the display, recorded in the integral data store, and can be documented via the AtmoCONTROL software
• MobileALERT, notification by SMS in case of any error or alarm of the device (Requires option H6)
• Castor frame (2-part), height 140 mm
• Fresh-air filter (filtration efficiency 80 %) mounted at the bottom (for UF/UFplus). For model sizes 30 – 260, subframe or subframe on castors obligatory
• Stainless steel grids, electropolished
• Reinforced stainless steel grid, electropolished, max. loading 60 kg; from size 450 with guide bars and fixing screws (only in connection with option K1). Please consider max. loading of chamber
• Perforated stainless steel shelf
• Reinforced perforated stainless steel shelves, max. loading 60 kg, with guide bars and fixing screws and only in connection with option K1. Please consider max. loading of chamber/li>
• Stainless steel slide-in drip tray, 15 mm rim (may affect the temperature distribution) - cannot be used in connection with option K1
• USB-Ethernet adapter
• Ethernet connection cable 5 m for computer interface
• USB User-ID stick (with User-ID licence):
• USB stick with documentation software AtmoCONTROL and operation manual for products with Single DISPLAY (the standard equipment of appliances with Twin DISPLAY includes one USB stick with AtmoCONTROL)
• Set of height adjustable feet (4 pcs)
• Stacking set (4 pcs) for stacking of appliances of same size
• Plug-in tube extension (outer diam. 60,3 mm, inner 57 mm), straight Or angled , for exhaust air ducting (if necessary for connection by hose)
• Flush-fit unit (stainless steel frame covering gap between oven and wall opening), with air slots – technical clarification required
• Flush-fit unit (stainless steel frame covering gap between oven and wall opening), without air slots – technical clarification required
• Subframe, adjustable in height (size 30 to 75: height 600 mm, size 110 to 450: height 500 mm or (size 30 to 75: height 660 mm, size 110 to 160: height 560 mm)
• Software conforming to FDA AtmoCONTROL. Meets the requirements for the use of electronically stored data sets and electronic signatures as laid down in Regulation 21 CFR Part 11 of the US Food and Drug Administration (FDA). Base licence for the control of one unit (only for units with TwinDISPLAY). Respective IQ/OQ documents available in German and English language (without surcharge)
• Integration of one additional unit (up to max. 31 units) into an already existent FDA-software licence (only for units with TwinDISPLAY)